|
|
|
Materials and Recycling, Manufacturing |
|
67 |
LIGHT-WEIGHT DESIGN OF AUTOMOTIVE SUSPENSION LINK BASED ON DESIGN OF EXPERIMENT
J. H. PARK, K. J. KIM, J. W. LEE, J. K. YOON
Int J Automot Technol. 2015;16(1):67-71. DOI: https://doi.org/10.1007/s12239-015-0007-4
 
|
Cited By 36 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
1137 |
IMC AND CREEP BEHAVIOR IN LEAD-FREE SOLDER JOINTS OF Sn-Ag AND Sn-Ag-Cu ALLOY SYSTEM BY SP METHOD
Z. J. YANG, S. M. YANG, H. S. YU, S. J. KANG, J. H. SONG, K. J. KIM
Int J Automot Technol. 2014;15(7):1137-1142. DOI: https://doi.org/10.1007/s12239-014-0118-3
|
|
Cited By 12 |
|
|
|
|
|
Automobile Body and Safety |
|
713 |
EFFECT OF STRUCTURAL VARIABLES ON AUTOMOTIVE BODY BUMPER IMPACT BEAM
K. J. KIM, S. T. WON
Int J Automot Technol. 2008;9(6):713-717.
|
|
|
|
|
Engine, Emission Technology |
|
19 |
COMPARISON OF THE COMBUSTION CHARACTERISTICS BETWEEN S.I. ENGINE AND R.I. ENGINE
S. S. CHUNG, J. Y. HA, J. S. PARK, K. J. KIM, J. K. YEOM
Int J Automot Technol. 2007;8(1):19-25.
|
|
|
|
|
Automobile Body and Safety |
|
485 |
SERRATION MECHANISM OF AA5182/POLYPROPYLENE/AA5182 SANDWICH SHEETS
K. J. KIM
Int J Automot Technol. 2006;7(4):485-492.
|
|
|
|
|
Engine, Emission Technology |
|
555 |
STUDY ON COMBUSTION CHARACTERISTICS AND APPLICATION OF RADIAL INDUCED IGNITION METHOD IN AN ACTUAL ENGINE
J. S. PARK, B. M. KANG, K. J. KIM, T. W. LEE, J. K. YEOM, S. S. CHUNG
Int J Automot Technol. 2005;6(6):555-561.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
259 |
PLASTIC STRAIN RATIOS AND PLANAR ANIOSOTROPY OF AA5182/POLYPROPYLENE/AA5182 SANDWICH SHEETS
K. J. KIM
Int J Automot Technol. 2005;6(3):259-268.
|
|
|
|
> Browse Articles > Author Index
